Mazda MX-30 Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
28 Posts
Discussion Starter · #1 ·
Morning all,

Every time I go through a tunnel the main beam comes on, that is fine as I like the AUTO headlight function.
How do I disable the additional function when it flicks to HIGH beam? I have looked through the book and can't find anything, help...
 

· Registered
Mazda MX30--Mazda 626 GD FE 12V Carb.
Joined
·
16 Posts
there is a second auto headlight setting on the end of the stick of the lightswitch if you push on that it will automaticly put up headlights and turn them down when crossing another car
I think u need to push it again to end that function and just leave it on auto on the round dail to have it like you want
But then you have to manualy put up you high beam
 

· Registered
Joined
·
789 Posts
That probably won't work but hey ho...just downloaded Canadian mx30 mazda connect guide and they have a hbc enable/disable function shown in the menu on exterior lighting. I wonder if European vehicles had this option removed or will it come in future sw upgrades? See extract from Canadian connect guide

Exterior Lighting
Configures settings for the vehicle's exterior lighting.
Function Available setting changes
Automatic Headlight Sensitivity
Adjusts the sensitivity of the automatic headlight illumination feature.
Low,Medium-Low,Medium,Medium-High,High
Automatic Headlight Timeout
Sets the length of delay before headlights turn off.
30 seconds,
60 seconds,
90 seconds,
120 seconds,
Off
Adaptive LED Headlights (ALH)
Enables Adaptive LED Headlights for increased visibility.
Enable,Disable
High Beam Control System (HBC)
Switches between high and low beam automatically.
Enable,Disable
Adaptive Front-Lighting System (AFS)
Adjusts lighting output based on driving conditions.
Enable,Disable
Daytime Running Lights (DRL)
Enables the daytime running lights.
Enable,Disable
Coming Home Light
Sets the length of delay before headlights turn off.
30 seconds,
60 seconds,
90 seconds,
120 seconds,
Off
Leaving Home Light
Turns headlights on with unlock button press on key.
Enable,Disable
Restore Factory Settings
Restores exterior lighting settings to factory defaults. ―
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top