Mazda MX-30 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Bought my MX-30 (hybrid - Australia) in July and loving it, but one nagging issue that escapes my limited technical ability to resolve.
Initially set up my Samsung S9 phone via Bluetooth - no problems. Now trying to add my wife's Samsung S8 but the system will only accept one phone as system messages "Your S9 will be disconnected......" If I proceed and disconnect the S9 the S8 connects without problem. The same issue occurs if I try to add the S9 with the S8 already connected.
Anyone had similar issues? My previous 2013 CX5 allowed multiple phone connections.
 

·
Registered
Joined
·
298 Posts
My 2019 mazda cx5 only allowed one active Bluetooth connection at a time. You could register more than one but it only connected to the last phone used (most recent) so you had to physically change it if you wanted to activate another primary connection. My current mx30 seems to be the same. You can change to user specified and set connection order but again this may only allow one active connection at a time. Also you can have one as audio only and one as phone only. I am assuming you want both to be phone?

Something to try (I haven't tried it) is to have only one phone set on Bluetooth (delete the one you connect to android/apple) and the other on android/apple only connected by cable to USB. This may allow dual connection but not sure if android takes precedence over Bluetooth or vice versa. Worth trying

Alan
 
1 - 2 of 2 Posts
Top