Mazda MX-30 Forum banner
1 - 6 of 6 Posts

·
Registered
2020 MX30
Joined
·
46 Posts
Discussion Starter · #1 · (Edited)
Check the latest MAP database available on : https://mazda.welcome.naviextras.com
Check your MX-30s MAP database version in the
Navigation Menu / Travel Information / About.
If your cars navigation database is older you can update it using cars SD card and a free software available from: https://infotainment.mazdahandsfree.c...
  • Switch OFF your MX-30 and remove SD card,
  • Download the Mazda Toolbox software appropriate to your computer OS,
  • Insert SD card to your computer,
  • Mazda Update Toolbox will recognize SD card and your privileges and will offer an update,
  • Depending on your region and internet speed the update might take apr. 30-45 minutes,
  • Once finished safely remove SD card form computer and insert back in the MX-30 SD card slot.
  • Switch ON your car and start Navigation menu, after short update notice you have the latest MAP.
 

·
Registered
Joined
·
5 Posts
Thank for the instructions. Before updating the Toolbox wants to make a back-up. In Windows this is default on the C: drive. It is not possible to select another location or external drive. Is it possible to enter a request for improvement to the provider of the Toolbox?
 

·
Registered
Mx-30 dec 2020 luxury polymetal grey
Joined
·
16 Posts
The nav update is ok! It shows all the spots where u can load Ur car.
 

·
Registered
MX-30
Joined
·
36 Posts
updating the SD to the DEC21 release... but:
  • backup done
  • first attempt of install of new map on existing SD returns an error at 93% as the SD card is full to the brim
  • had to format it - install the backup - then update (this update was not downloaded as already on my pc? went straight to the install phase) - installed successfully

the issue:
put the SD back in the car and - all system is in english - map guide voice is in english - the NAV menu only is in... Polish or something like that

took the SD out again, installed the backup and everything went back to english again.
Any clue here?! - trying to do it again from scratch this morning as yesterday ended up at 2am in the garage :)

Update - SOLVED

for some reasons my SD started as 15GB out of 30GB. During installation there was not enough space. Solution:
  • do a backup of the SD card just in case (better safe than sorry)
  • copy all the visible content of the SD on your laptop (2 folders - content & licence)
  • format the SD card
  • copy again those 2 folders on the SD (it is now 4GB instead of 15GB?!)
  • updated as per toolbox process - completed successfully

I now have the updated map and the NAV menu is in English again. No idea what toolbox was doing!
 

·
Registered
MX-30
Joined
·
36 Posts
Thank for the instructions. Before updating the Toolbox wants to make a back-up. In Windows this is default on the C: drive. It is not possible to select another location or external drive. Is it possible to enter a request for improvement to the provider of the Toolbox?
as per my understanding the backup will be a hidden file somewhere, but Mazda does not want you to be able to locate it (it will be in app data folder under user name I assume)
 

·
Registered
Joined
·
298 Posts
Just completed sat navigation sd card update. As usual took its time. Not a quick process. Three errors saying saying check connection to Mazda server. Wasn't my local network so gave the blame to the Mazda end.

Firstly back up done automatically slowly
Secondly downloaded slowly...
Thirdly the dreaded install...all went fine slowly until 93% then it slowed right down and I thought oh no same as birillo_79..
And then after touching as much wood as I could find it suddenly went to install successfully completed...yah blinking hoo. No intervention required. Perhaps they have amended it or birillo_79 was just unlucky!

Plugged back into car and all appears fine...but watch this space!

Alan
 
1 - 6 of 6 Posts
Top