[ROBWIL]

I drive on a average speed camera road to town 60mph limit.
It shows 50mph for HGV on route here and there..
the mx30 sees it and sets all the way beeping me for over speed.
On my CX3 it also set it ,but went back to 60mph after a minute or so.
What is different about the MX30 TSR from the CX3 TSR software, I can switch it off , but it is pain.

 

[Thebriggie]

Cannot comment re CX3 and TSR compared to MX30. Have you changed threshold and alert type to at least make it bearable 😱

Alan

 

[ROBWIL]

Cannot comment re CX3 and TSR compared to MX30. Have you changed threshold and alert type to at least make it bearable 😱

Alan

Hi Alan,
Yes stopped the audible ,visual only, acceptable!!!,
I also noticed speed limit sometimes stays at last speed limit seen instead of current speed limit .
Traffic sign recognition is a bit hit and miss.

 

[Thebriggie]

Agreed. I just grin and bear it now! The old fashioned look at the speedometer method comes into play

Alan

 

[ROBWIL]

Agreed. I just grin and bear it now! The old fashioned look at the speedometer method comes into play

Alan

Thank goodness for the brilliant HUD

 

[Kvickstick]

Hi Alan,
Yes stopped the audible ,visual only, acceptable!!!,
I also noticed speed limit sometimes stays at last speed limit seen instead of current speed limit .
Traffic sign recognition is a bit hit and miss.

On the way to work, i have a short drive on the highway. The highway speed is 70 km/h and later on 80 km/h. Problem is that everytime the system sees the highway sign the car display110 km/h which is the standard in Sweden. It does change it to the correct speed when passing the 70/80 km/h signs then later on back to 110 km/h. I don't know if the GPS data and sign recognition conflict with each other or if its just the quirks of the sign recognition system.

 

[Hawke]

On the way to work, i have a short drive on the highway. The highway speed is 70 km/h and later on 80 km/h. Problem is that everytime the system sees the highway sign the car display110 km/h which is the standard in Sweden. It does change it to the correct speed when passing the 70/80 km/h signs then later on back to 110 km/h. I don't know if the GPS data and sign recognition conflict with each other or if its just the quirks of the sign recognition system.

Does your MX-30 have the TSR update that became available last spring? If so is your experience better after?

Traffic sign recognition

 

[Kvickstick]

Does your MX-30 have the TSR update that became available last spring? If so is your experience better after?

Traffic sign recognition

I will look into it, thanks!

 

[ROBWIL]

I will look into it, thanks!

My MX30 is the new version registered in August 22 ,I don't think it is using GPS.
Try switching on SATNAV to see if if it shows correct speed.